Error Reporting; Table 151: Selective Self-Test Log Data Structure; Table 152: S.m.a.r.t. Error Codes - Hitachi HTS542525K9SA00 Specifications

of the Selective self-test log which is 512 bytes long. All multi-byte fields shown in these data structures follow the
ATA/ATAPI-7 specifications for byte ordering.
Table 152: Selective self-test log data structure
Description
Data structure revision
Starting LBA for test span 1
Ending LBA for test span 1
Starting LBA for test span 2
Ending LBA for test span 2
Starting LBA for test span 3
Ending LBA for test span 3
Starting LBA for test span 4
Ending LBA for test span 4
Starting LBA for test span 5
Ending LBA for test span 5
Reserved
Vendor specific
Current LBA under test
Current span under test
Feature flags
Vendor specific
Selective self-test pending time
Reserved
Data structure checksum

12.42.8 Error reporting

The following table shows the values returned in the Status and Error Registers when specific error conditions are
encountered by a device.
Table 153: S.M.A.R.T. Error Codes
A S.M.A.R.T. FUNCTION SET command was received by the
device without the required key being loaded into the
Cylinder High and Cylinder Low registers.
A S.M.A.R.T. FUNCTION SET command was received by the
device with a subcommand value in the Features Regis-
ter that is either invalid or not supported by this
device.
Error condition
Deskstar 7K160 Hard Disk Drive Specification
Bytes Offset
2 00h
8 02h
8 0Ah
8 12h
8 1Ah
8 22h
8 2Ah
8 32h
8 3Ah
8 42h
8 4Ah
256 52h
154 152h
8 1ECh
2 1F4h
2 1F6h
4 1F8h
2 1FCh
1 1FEh
1 1FFh
512
Status Register
244
Read/Write
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Reserved
Vendor specific
Read
Read
R/W
Vendor specific
R/W
Reserved
R/W
Error Register
51h 04h
51h 04h