Hitachi TAGMASTORE MK-90RD011-25 User Manual page 165

(3) Discover and describe the command device on SYS$POSIX_ROOT:[etc]horcm0.conf.
$ inqraid DKA145-151 -CLI
DEVICE_FILE PORT
DKA145 CL1-H
DKA146 CL1-H
DKA147 CL1-H
DKA148 CL1-H
DKA149 CL1-H
DKA150 CL1-H
DKA151 CL1-H
SYS$POSIX_ROOT:[etc]horcm0.conf
HORCM_MON
#ip_address service
127.0.0.1 30001
HORCM_CMD
#dev_name dev_name
DKA145
You will have to start HORCM without a description for HORCM_DEV and HORCM_INST
because target ID & LUN are Unknown.
You will be able to know about a mapping of a physical device with a logical name easily by
using the raidscan -find command option.
(4) Execute an 'horcmstart 0'.
$ run /DETACHED SYS$SYSTEM:LOGINOUT.EXE /PROCESS_NAME=horcm0 -
_$ /INPUT=VMS4$DKB100:[SYS0.SYSMGR.][horcm]loginhorcm0.com -
_$ /OUTPUT=VMS4$DKB100:[SYS0.SYSMGR.][horcm]run0.out -
_$ /ERROR=VMS4$DKB100:[SYS0.SYSMGR.][horcm]run0.err
%RUN-S-PROC_ID, identification of created process is 00004160
(5) Verify a physical mapping of the logical device.
$ HORCMINST := 0
$ raidscan -pi DKA145-151 -find
DEVICE_FILE UID S/F PORT
DKA145 0
DKA146 0
DKA147 0
DKA148 0
DKA149 0
DKA150 0
DKA151 0
$ horcmshutdown 0
inst 0:
HORCM Shutdown inst 0 !!!
SERIAL LDEV CTG H/M/12 SSID R:Group PRODUCT_ID
30009 145 -
30009 146 - s/S/ss 0004 5:01-11 OPEN-9
30009 147 - s/P/ss 0004 5:01-11 OPEN-9
30009 148 - s/S/ss 0004 5:01-11 OPEN-9
30009 149 - s/P/ss 0004 5:01-11 OPEN-9
30009 150 - s/S/ss 0004 5:01-11 OPEN-9
30009 151 - s/P/ss 0004 5:01-11 OPEN-9
poll(10ms)
1000
dev_name
TARG LUN
F CL1-H 0 1
F CL1-H 0 2
F CL1-H 0 3
F CL1-H 0 4
F CL1-H 0 5
F CL1-H 0 6
F CL1-H 0 7
Hitachi Command Control Interface (CCI) User and Reference Guide
- - - OPEN-9-CM
timeout(10ms)
3000
SERIAL LDEV PRODUCT_ID
30009 145 OPEN-9-CM
30009 146 OPEN-9
30009 147 OPEN-9
30009 148 OPEN-9
30009 149 OPEN-9
30009 150 OPEN-9
30009 151 OPEN-9
147