Hitachi TAGMASTORE MK-90RD011-25 User Manual page 364

Error Code Error Message
EX_EWSTOT Timeout waiting for
specified status
EX_EWSLTO Timeout waiting for
specified status on
the local host
EX_ESTMON HORCM Monitor
stopped
EX_UNWCMD Unknown command
EX_INCSTG Inconsistent status
in group
EX_INVSTP Invalid pair status
EX_INVVOL Invalid volume
status
EX_INVMUN Invalid mu# with
HORC or HOMRCF
EX_ENLDEV No such LDEV
within the RAID
EX_INVRCD Invalid return code
EX_VOLCUR S-Vol currency error
EX_VOLCUE Local volume
currency error
EX_VOLCRE Local and remote
vol. currency error
EX_UNWERR Unknown error
code.
EX_ENOCTG Not enough CT
groups in the RAID
EX_EXTCTG Extended CT group
across RAIDs
346 Chapter 5 Troubleshooting
Condition
Detected a time out, before it made it
to the designated status.
Timeout error because the remote
did not notify about expected status
in time.
HORC Manager monitoring was
refused.
An unknown command was
attempted.
The pair status of a volume within a
group is not identical to the status of
the other volumes in the group.
The pair status of the target volume
is not appropriate.
The volume status of the target
volume is not appropriate.
The MU# of the volume to be
operated is not appropriate.
A device defined in the configuration
file does not have a mapping to a
real LUN and target ID within the
RAID storage system.
Wrong return code.
Currency check error for S-VOL.
Cannot guarantee identical data on
S-VOL.
The volume specified with the
SVOL-takeover command is not the
same as the P-VOL.
The combination of the volumes
specified with Swap-takeover is
unsuitable.
Wrong error code.
CTGID could not be registered due
to being beyond the max number of
CT groups (0-255 for USP V/VM, 0-
255 for USP/NSC, 0-127 for 9900V,
0-63 for 9900, 0-15 for 7700E) for an
async volume.
A Hitachi TrueCopy Async or
ShadowImage volume is defined in
the configuration file
(HORCM_CONF) as a group that
extends across storage systems.
Recommended Action
Please increase the value of the timeout using
the -t option.
Please confirm that HORC Manager on the
remote host is running.
Please confirm the value of "poll" in the
configuration file.
Please confirm the command name.
Please confirm the pair status using the
pairdisplay command.
Please confirm the pair status using the
pairdisplay command.
Please confirm the pair status using the
pairdisplay -l command.
Please confirm the MU# for the specified group
using the pairdisplay command. MU #1/2 cannot
be used for Hitachi TrueCopy, and MU #1/2 must
be P-VOL for ShadowImage.
Please confirm that the Port, Target ID, LUN are
defined correctly under HORCM_DEV in the
configuration file.
Call the Hitachi Data Systems Support Center.
Check the volume list to see if an operation was
directed to the wrong S-VOL.
Please confirm the pair status of the local volume.
Please confirm the pair status of remote and local
volumes using the pairdisplay command.
Call the Hitachi Data Systems Support Center.
Choose an existing CTGID (use pairvolchk to
display CTGIDs). Use the '-f async <CTGID>'
option of the paircreate command to force the
pair into a pre-existing CTGID.
Please confirm the serial # of the volumes by
using the pairdisplay command to verify that the
CT group is contained completely within one
RAID storage system.
Value
233
232
231
230
229
228
222
220
227
226
225
224
223
--
217
216