Hitachi TAGMASTORE MK-90RD011-25 User Manual page 112

Designate a group name and display pair status.
# pairdisplay -g oradb -m cas
Group PairVol(L/R) (Port#,TID,LU-M),Seq#,LDEV#.P/S,Status, Seq#,P-LDEV# M
oradb oradev1(L) (CL1-D , 2, 1-0)30053 268..S-VOL PAIR,-----
oradb1 oradev11(L) (CL1-D , 2, 1-1)30053 268..P-VOL PAIR,30053
oradb2 oradev21(L) (CL1-D , 2, 1-2)30053 268..SMPL ----,----- ---- -
oradb oradev1(R) (CL1-A , 1, 1-0)30053 266..P-VOL PAIR,30053
oradb oradev2(L) (CL1-D , 2, 2-0)30053 269..S-VOL PAIR,-----
oradb1 oradev12(L) (CL1-D , 2, 2-1)30053 269..P-VOL PAIR,30053
oradb2 oradev22(L) (CL1-D , 2, 2-2)30053 269..SMPL ----,----- ---- -
oradb oradev2(R) (CL1-A , 1, 2-0)30053 267..P-VOL PAIR,30053
The command device is defined using the system raw device name (character-type device
file name). The command device defined in the configuration definition file must be
established in a way to be following either every instance. If one command device is used
between different instances on the same SCSI port, then the number of instances is up to 16
per command device. If this restriction is exceeded, then use a different SCSI path for each
instance. For example, the command devices for Figure 2.45 would be:
HP-UX:
HORCM_CMD of HOSTA (/etc/horcm.conf) ... /dev/rdsk/c0t0d1
HORCM_CMD of HOSTB (/etc/horcm.conf) ... /dev/rdsk/c1t0d1
HORCM_CMD of HOSTB (/etc/horcm0.conf) ... /dev/rdsk/c1t0d1
Solaris:
HORCM_CMD of HOSTA(/etc/horcm.conf) ... /dev/rdsk/c0t0d1s2
HORCM_CMD of HOSTB(/etc/horcm.conf) ... /dev/rdsk/c1t0d1s2
HORCM_CMD of HOSTB(/etc/horcm0.conf) ... /dev/rdsk/c1t0d1s2
Note: For Solaris operations with CCI version 01-09-03/04 and higher, the command
device does not need to be labeled during format command.
AIX:
HORCM_CMD of HOSTA(/etc/horcm.conf) ... /dev/rhdiskXX
HORCM_CMD of HOSTB(/etc/horcm.conf) ... /dev/rhdiskXX
HORCM_CMD of HOSTB(/etc/horcm0.conf)... /dev/rhdiskXX
where XX = device number assigned by AIX
Tru64 UNIX:
HORCM_CMD of HOSTA(/etc/horcm.conf) ... /dev/rrzbXXc
HORCM_CMD of HOSTB(/etc/horcm.conf) ... /dev/rrzbXXc
HORCM_CMD of HOSTB(/etc/horcm0.conf)... /dev/rrzbXXc
where XX = device number assigned by Tru64 UNIX
DYNIX/ptx
HORCM_CMD of HOSTA(/etc/horcm.conf) ... /dev/rdsk/sdXX
HORCM_CMD of HOSTB(/etc/horcm.conf) ... /dev/rdsk/sdXX
HORCM_CMD of HOSTB(/etc/horcm0.conf)... /dev/rdsk/sdXX
where XX = device number assigned by DYNIX/ptx
94 Chapter 2 Overview of CCI Operations
®
:
266 -
270 -
268 -
267 -
271 -
269 -
®