LEGEND for Table 2.2, Table 2.3, and Table 2.4:
Accepted = Accepted and executed. When operation terminates normally, the status
changes to the indicated number.
Acceptable = Accepted but no operation is executed.
Rejected = Rejected and operation terminates abnormally.
Table 2.2
Pair Status versus TrueCopy and Universal Replicator Commands
#
Status
Copy
SMPL
Accepted
COPY
Acceptable
PAIR
Acceptable
PSUS
Rejected
PSUE
Rejected
PDUB
Rejected
Pairsplit of a Hitachi TrueCopy Asynchronous volume will be returned after verification of
state transition that waits until delta data is synchronized from P-VOL to S-VOL.
Note: In case of the SSWS state after SVOL-SSUS-takeover, pairresync command (from
PVOL to SVOL) is rejected because the delta data for SVOL becomes dominant, and its state
expect to be using -swaps(p) option of pairresync. If the pairresync command (from PVOL to
SVOL) is rejected, confirm this special state using the -fc option of the pairdisplay
command.
20
Chapter 2 Overview of CCI Operations
Hitachi TrueCopy Command
Paircreate
Nocopy
-r or -rw option
Accepted
Rejected
Acceptable
Accepted
Acceptable
Accepted
Rejected
Acceptable
Rejected
Rejected
Rejected
Rejected
Pairsplit
-P option
-S option
Rejected
Acceptable
Rejected.
Accepted
Accepted
Accepted
Acceptable
Accepted
Rejected
Accepted
Rejected
Accepted
Pairresync
Resync
Rejected
Acceptable
Acceptable
Accepted
(see Note)
Accepted
(see Note)
Accepted
(see Note)