Figure 4.34 Raidvchkdsp Command Example With -V Cflag Option - Hitachi TAGMASTORE MK-90RD011-25 User Manual

Output of the raidqvchkdsp command with -fe option:
EM: This column displays the external connection mode.
H = Mapped E-lun is hidden from the host.
V = Mapped E-lun is visible to the host.
—= Unmapped to the E-lun.
BH = Mapped E-lun as hidden from the host, but LDEV blockading.
BV = Mapped E-lun as visible to the host, but LDEV blockading.
B = Unmapped to the E-lun, but LDEV blockading.
E-Seq#: This column displays the production (serial) number of the external LUN
('Unknown' shown as '-').
E-LDEV#: This column displays the LDEV# of the external LUN ('Unknown' shown as '-').
raidvchkdsp -g vg01 -fd -v cflag
Group PairVol Device_File
vg01 oradb1 c4t0d2
vg01 oradb2 c4t0d3

Figure 4.34 Raidvchkdsp Command Example with -v cflag Option

Output of the raidqvchkdsp command with -v cflag option:
BR-W-E-E: This column displays the flags for checking regarding data block size.
R = E: Checking for data block size on Read is enabled.
D: Checking for data block size on Read is disabled.
W = E: Checking for data block size on Write is enabled.
D: Checking for data block size on Write is disabled.
E = L: Data block on Read/Write is interpreted as little endian format.
B: Data block on Read/Write is interpreted as big endian format.
E = W: Warning that Read/Write is not rejected when validation error is detected.
C: Read/Write is rejected when validation error is detected.
MR-W-B: This column displays the flags for checking regarding CHK-F3 in the data block.
R = E: Checking for CHK-F3 on Read is enabled.
D: Checking for CHK-F3 on Read is disabled.
W = E: Checking for CHK-F3 on Write is enabled.
D: Checking for CHK-F3 on Write is disabled.
B = E: Checking for CHK-F3 in the data block #0 is enabled.
D: Checking for CHK-F3 in the data block #0 is disabled.
BR-W-B-Z: This column displays the flags for checking regarding CHK-F2 in the data
block.
R = E: Checking for CHK-F2 on Read is enabled.
D: Checking for CHK-F2 on Read is disabled.
W = E: Checking for CHK-F2 on Write is enabled.
D: Checking for CHK-F2 on Write is disabled.
B = E: Comparing for CHK-F2 in the data block is enabled.
D: Comparing for CHK-F2 in the data block is disabled.
Z = E: The NON zero checking for CHK-F2 in the data block shows to being enabled.
D: The NON zero checking for CHK-F2 in the data block shows to being disabled.
Seq# LDEV# BR-W-E-E MR-W-B BR-W-B-Z SR-W-B-S
2332 2 D E B R
2332 3 D E B R
Hitachi Command Control Interface (CCI) User and Reference Guide
D D D D E E E D E D D
D D D D E E E D E D D
245