Table of Contents
Advertisement
4.3.2
Deleting Pairs (Pairsplit -S)
The pair delete operation is executed by using the -S option of the pairsplit command. When
the pairsplit -S command is issued, the specified Hitachi TrueCopy or ShadowImage pair is
deleted, and each volume is changed to SMPL (simplex) mode. If you want to re-establish a
pair which has been deleted, you must use the paircreate command (not pairresync).
Hitachi Command Control Interface (CCI) User and Reference Guide
179
Advertisement
Table of Contents
Troubleshooting
