Figure 4.61 Inqraid: Example Of -Find Option (Linux Example Shown); Figure 4.62 Inqraid: Example Of -Find Option (Hp-Ux Example Shown); Figure 4.63 Inqraid: Example Of -Findc Option (Hp-Ux Example Shown) - Hitachi TAGMASTORE MK-90RD011-25 User Manual

CHNO: Displays the channel number on the device adapter that recognizes on the Linux
host. Displayed only for Linux systems.
TID: Displays target ID of the hard disk that connects on the device adapter port.
Displayed only for Linux systems.
LUN: Displays logical unit number of the hard disk that connects on the device adapter
port. Displayed only for Linux systems.
Note: The display of Group, SSID, and CTGID depends on the storage system microcode
level. The CHNO, TID, and LUN items are displayed only for Linux systems.
ls /dev/sd* | inqraid -find
/dev/sdb -> No such on the group
Group PairVol(L/R) (Port#,TID,LU),Seq#,LDEV#.P/S,Status,Fence, Seq#,P-LDEV# M
oradb oradev2(L) (CL2-N , 3, 2) 8071
->/dev/sdc

Figure 4.61 Inqraid: Example of -find Option (Linux example shown)

# echo /dev/rdsk/c23t0d0 /dev/rdsk/c23t2d3 | ./inqraid -find
Group PairVol(L/R) (Port#,TID,LU-M),Seq#,LDEV#.P/S,Status, Seq#,P-LDEV# M
horc1 dev00(L) (CL2-J , 0, 0-0)61456 192..S-VOL SSUS,-----
->/dev/rdsk/c23t0d0
Group PairVol(L/R) (Port#,TID,LU-M),Seq#,LDEV#.P/S,Status, Seq#,P-LDEV# M
horc1 dev10(L) (CL2-J , 2, 3-0)61456 209..S-VOL SSUS,-----
->/dev/rdsk/c23t2d3

Figure 4.62 Inqraid: Example of -find Option (HP-UX example shown)

# echo /dev/rdsk/c23t0d0 /dev/rdsk/c23t2d3 | ./inqraid -findc
DEVICE_FILE M Group
c23t0d0 0 horc1
/dev/rdsk/c23t0d0[1] -> No such on the group
/dev/rdsk/c23t0d0[2] -> No such on the group
DEVICE_FILE M Group
c23t2d3 0 horc1
/dev/rdsk/c23t2d3[1] -> No such on the group
/dev/rdsk/c23t2d3[2] -> No such on the group
# echo /dev/rdsk/c23t0d0 /dev/rdsk/c23t2d3 | ./inqraid -findc -CLI
DEVICE_FILE M Group
c23t0d0 0 horc1
c23t2d3 0 horc1

Figure 4.63 Inqraid: Example of -findc Option (HP-UX example shown)

DEVICE_FILE: Device file name.
M: MU# of local and remote.
Group: Group name (dev_group) defined in the configuration file.
PairVol: Paired vol. name (dev_name) within the group defined in the configuration file.
P/S: Volume attribute (PVOL or SVOL or simplex).
Stat: Status of the paired volume.
R_DEVICE: Device file name of remote site.
LK: Check result of the paired volume connection path.
22..SMPL ---- ------,----- ---- -
PairVol P/S Stat R_DEVICE
dev00 S-VOL SSUS c23t0d1
PairVol P/S Stat R_DEVICE
dev10 S-VOL SSUS c23t2d2
PairVol P/S Stat R_DEVICE
dev00 S-VOL SSUS c23t0d1
dev10 S-VOL SSUS c23t2d2
Hitachi Command Control Interface (CCI) User and Reference Guide
193 -
206 -
M P/S Stat LK
0 P-VOL PSUS OK
M P/S Stat LK
0 P-VOL PSUS OK
M P/S Stat LK
0 P-VOL PSUS OK
0 P-VOL PSUS OK
285