Table 4.4 Specific Error Codes For Paircreate - Hitachi TAGMASTORE MK-90RD011-25 User Manual

Table 4.4 Specific Error Codes for Paircreate
Category
Volume status
Unrecoverable
Resource
Unrecoverable
Note: Unrecoverable errors are fixed and will not be resolved, even after re-executing the
command. If the command failed, the detailed status will be logged in the CCI command log
($HORCC_LOG) (see Table A.2), even if the user script has no error handling.
172 Chapter 4 Performing CCI Operations
Error Code Error Message
EX_ENQVOL Unmatched volume status
within the group
EX_INCSTG Inconsistent status in group
EX_INVVOL Invalid volume status
EX_INVSTP Invalid pair status
EX_ENQSIZ Unmatched volume size for
pairing
EX_ENOCTG Not enough CT groups in
the RAID
EX_ENXCTG No CT groups left for OPEN
Vol use.
EX_ENOPOL Not enough Pool in RAID
Recommended Action
Confirm status using the pairdisplay command.
Make sure all volumes in the group have the
same fence level and volume attributes.
Confirm pair status using pairdisplay.
Confirm pair status using pairdisplay -l.
Confirm pair status using pairdisplay.
Confirm volume size or number of LUSE volume
using raidscan -f, and make sure volume sizes
are identical.
Choose an existing CTGID (pairvolchk displays
CTGIDs). Use '-f async <CTGID>' or '-m grp
<CTGID>' option of paircreate to force the pair
into a pre-existing CTGID.
Confirm whether all CT groups are already used
by TC/TC390 Async or SI/SI390.
Could not retain the pool for executing a
command due to be exceeded the threshold rate.
Delete unnecessary/earlier generations paired
volume, or re-synchronize unnecessary/earlier
generations split volume.
Value
236
229
222
228
212
217
215
206