Dish Setting; Manual Scan - Strong SRT 4950E User Manual

4.1 Dish Setting

Dish Setting allows you to configure the antenna setting parameters.
1. Satellite: Select the satellite which you want to setup.
2. Transponder: press OK button into TP list then press CH+/CH- button to
change the TP, then press CH+/CH- button to Add/Delete/Edit TP.
3. LNB Freq: Press the VOL+/- button to change the LNB frequency.
4. LNB Power: Select the required LNB power.
5. 22KHz: It used to control the 22 KHz switch (On for open, Off to Off, or Auto
for automatic Settings 22 KHz).
6. DiSEqC 1.0: It used to set DiSEqC1.0 port ,press the VOL+/VOL- button to
select the required.
7. DiSEqC 1.1: Press the VOL+/VOL- button to select the required DiSEqC1.1
input.
8. Channel Type Select the Channel type from All chanel, TV and Radio.
9. Start Search Select search model from the Satellite, Transponder, Multi-Sat
and Blind Search.

4.2 Manual scan

10