Table of Contents
Advertisement
Fax 4440 / MF 4461
Resolution setup
The RESOLUTION parameter allows you to setup the
photocopy resolution.
841 - ADVANCED FCT/COPY/RESOLUTION
1 Choose the resolution with the buttons
according to the following table:
Parameter
Low resolution.
DRAFT
Standard resolution for documents
AUTO
containing text and graphics.
Optimal resolution for documents
QUALITY
TEXT
containing text.
Optimal resolution for documents
PHOTO
containing photographies.
2 Confirm your choice by pressing the OK button.
You can also setup the resolution by
pressing the
Zoom setup
The ZOOM parameter allows you to reduce or enlarge an
area of a document by choosing the origin and the zoom
level to apply to the document, from 25 to 400 %.
842 - ADVANCED FCT/COPY/ZOOMING
1 Enter
the
desired
Alpanumerical
keyboard
predefined values with the buttons
2 Confirm your choice by pressing the OK button.
Assembled copy setup
843 - ADVANCED FCT/COPY/ASSEMBLED
The ASSEMBLED parameter allows you to assemble or
disassemble your copies. Enter the desired setting and
confirm your choice by pressing the OK button.
Analysis origin setup
If you want, you can change the origin of the scanner.
By entering new values for X and Y in mm (X < 209 and
Y < 280), you move the analysed area as shown on the
or
Signification
button.
zoom
level
with
the
or
choose
among
and
.
diagram below.
x
y
844 - ADVANCED FCT/COPY/ORIGIN
1 Select the X and Y coordinates with the buttons
or
.
2 Setup the desired coordinates with the digital
keyboard or the buttons
choice by pressing on the OK button.
Contrast setup
The CONTRAST parameter allows to choose the
photocopy contrast.
845 - ADVANCED FCT/COPY/CONTRAST
1 Setup the desired level of contrast with the buttons
and
, confirm by pressing the OK button.
2 You can also directly setup the desired contrast
with the
button, press several times on this
button until the desired setup without using the
Menu 845.
3 Quit this menu by pressing the
Brightness setup
The BRIGHTNESS parameter allows to lighten or darken
your original document.
846 - ADVANCED FCT/COPY/LUMINOSITY
1 Setup the desired brightness with the buttons
and
.
2 Confirm your choice by pressing the OK button.
3 Quit this menu by pressing the
Paper type setup
851 - ADVANCED FCT/SCAN. & PRINT/PAPER
1 Select the paper NORMAL or THICK that you use
with the buttons
2 Confirm your setup by pressing the OK button.
3 Quit this menu by pressing the
- 16 -
Analysed area
and
, confirm your
button.
button.
TYPE
and
.
button.
Advertisement
Table of Contents
