Positions Of Safety Labels On The Machine; Symbols For The Main Power Switch; Certification - Sagem FAX 4440 User Manual

Positions of Safety labels on the machine

The device has warning labels at the positions shown below. For your safety, you must never touch these surfaces
when you remove a paper jam or when you replace the EP cartridge.

Symbols for the main power switch

In accordance with IEC 60417, this machine uses the following symbols for the main power switch:
- means POWER ON.
- means POWER OFF.

Certification

The tagging attests to the product's compliance with the demands of the R&TTE 1999/5/EC directive.
For users security, in accordance with the 73/23/EEC directive. For electromagnetic disturbances, in accordance with
the 89/336/EEC directive.
The manufacturer declares that the products are manufactured in accordance with the APPENDIX II of the R&TTE
1999/5/EC directive.
The conformity declaration is available on www.sagem.com, see the support section or at the following address:
Sagem Communication - Customer relations department
4, rue du Petit Albi - 95800 Cergy Saint-Christophe - France
- 2 -
Fax 4440 / MF 4461