Table of Contents
Advertisement
Set Resolution
Custom settings /default settings
The changed settings are stored as new default set-
tings. If you select a special function for a one-time
process, take care to restore the default settings or
EN
factory settings after that.
1 Press OK, 16 and OK.
2 Using [ select RESOLUTION .
3 Confirm with OK.
4 Select the desired resolution using [.
NORMAL —For documents without special features
FINE —For documents with small print or drawings
SFINE —For documents with many details
PHOTO —For photos.
5 Confirm with OK.
Reducing Transmission Speed
Lowering the Transmission Speed
The machine adapts the transmission speed to the line
quality. This may take some time, especially for overseas
connections. Set a lower transmission speed if you are
sending faxes into networks with poor line quality.
1 Press OK, 21 and OK.
2 Select the desired speed using [.
3 Confirm with OK.
Turning Page Header On/Off
Page Header
Your name and number appear in the page header of each
fax transmission. If you do not wish to send out your in-
formation, you can turn this function off.
1 Press OK, 16 and OK.
2 Using [ select TX HEADER .
3 Confirm with OK.
4 Use [ to select whether you would like to turn the
function on or off.
5 Confirm with OK.
Switches Time Stamp On/Off
(LF¦3170, LF¦3175)
Type 2 (großer Core)
Time Stamp
The device prints the date and the exact arrival time on
every incoming fax received (also see chapter Time Stamp,
page 15). You have the option of turning this function off.
1 Press OK, 26 and OK.
2 Use [ to select whether you would like to turn the
function on or off.
3 Confirm with OK.
28
Switching Transmission Report
On/Off
Transmission Report
After every transmission, the device prints out a transmis-
sion report. Four different settings are available for the
transmission report.
1 Press OK, 25 and OK.
2 Use [ to select from the following settings:
WITH —After every error-free fax transfer, a transmission
report is printed. A transmission report is also printed in
cases in which a fax transfer is not successfully completed
because the recipient's line is busy.
WITHOUT —No transmission report will be printed. Print
the fax journal for an overview of the fax messages sent.
ALWAYS —The transmission report will be printed after
each successful fax transfer as well as after interrupted
transfers.
ON ERROR —The transmission will only be printed if the
fax transfer was not successfully completed or if it was ter-
minated prematurely.
3 Confirm with OK.
Additional Fax Reception Options
Sorted Print-Outs
Sorted Print-Outs
If your device receives fax transmissions with multiple pag-
es, it will sort the pages as it prints them. The pages that
were received last will be dispensed first. You have the op-
tion of turning this function off.
1 Press OK, 28 and OK.
2 Using [ select SORTED PRINT .
3 Confirm with OK.
4 Use [ to select whether you would like to turn the
function on or off.
5 Confirm with OK.
Printing Multiple Copies
Printing Multiple Copies
You can apply settings to your device whereby multiple
copies of fax transmissions are printed out upon reception.
1 Press OK, 28 and OK.
2 Using [ select NBR OF COPIES .
3 Confirm with OK.
4 Enter a value from 1 to 99.
5 Confirm with OK.
Advertisement
Table of Contents
