Cartridge Installation - Sagem FAX 4440 User Manual

Fax 4440 / MF 4461
You can use paper weighing between
60 and 105 g/m2.
1 Remove the paper feed cassette completely.
2 Push the lower panel down until it clicks.
3 Setup the back side feed cassette stop by pushing
the "PUSH" lever (A).
Then adjust the lateral paper guides to the paper
format by pushing lever (B) located on the left
guide. Adjust the length paper guide to the paper
format by pushing lever (C).
A
B
4 Take a paper stack, pull the paper off and align it
on a flat surface.
5 Put the paper stack in the feed cassette
(200 sheets for 80 g/m² paper for instance).
6 Put the feed cassette back in its location.

Cartridge installation

1 Stand in front of the machine.
2 Push the left and right sides of the cover and pull it
at the same time towards you.
3 Unpack the cartridge and hold it by its handle.
C
4 Insert the cartridge in its slot by pushing it until it
clicks (last move down) as shown on the picture
below.
5 Close the cover.
- 12 -