Henny Penny PFE-590 Operator's Manual page 36

Pressure fryer

Hide thumbs Also See for PFE-590:

Table of Contents

3-13. PREVENTIVE

MAINTENANCE

Continued)

3-17

Reversing Lid Gasket (Continued)

Be sure the metal arm on the left side of the lid is in the

vertical position holding the lid upright, or severe

injuries could result. (See photo at left.)

Using a thin blade screwdriver, pry out the gasket at the

corners. Remove the gasket.

Check the gasket for any tears or nicks. If the gasket is

damaged, it needs to be replaced.

Clean the gasket and gasket seat with hot water.

Rotate the gasket with the opposite side facing out.

Install the 4 corners of the lid gasket. Smooth the

gasket into place, working from the corners towards the

middle of each side.

Lubricating Lid Rollers - Annually

The lid rollers, in the back of the fryer, should be lubricated at

least once a year, to allow the lid easy movement.

Remove the back shroud of the fryer.

Using spindle lube, part number 12124, place a small amount

of lube on both top and bottom rollers. Make sure to lube

both left and right rollers.

Model PFE- 590/592

703

Table of Contents

Pfe-592