Apic Mode; Mps Version Control For Os - Albatron PM266A PRO User Manual

APIC Mode

By enabling this option, "MPS version control for OS" can be configured.
Options: Disabled、Enabled (default)

MPS Version Control For OS

The 1.1 version is the older ver
Choose the new 1.4 version for Windows 2000 and Windows XP.
Options: 1.4 (default)、1.1
O S Select For DRAM > 64MB
Select "OS2" only if you are running the OS/2
Options: Non-OS2 (default)、OS2
H DD S.M.A.R.T. Capability
Self Monitoring Analysis and Reporting Techno
predict the possible failure of storage drives. Options: Disabled (default)、Enabled
Small LOGO (EPA) Show
This item allows you to show or hide the small LOGO EPA.
Options: Disabled (default)、Enabled
Advanced Chipse
DRAM Clock/ Drive Control
Press <Enter> to enter next page for DRAM Clock/ Driv
DRAM Timing
This item determines DRAM clock/ timi
Options: Manual、By SPD
D RAM CAS Latency
This item determines CAS Latency.
cycles of CAS latency depends on the DRAM timing. Do not reset this field from default value
specified by the system designer. Options:2 (default)、2.5
Precharge to Active (Trp)
You can set the time to precharge. Options: 3T (default)、2T
sion that supports 8 more IRQs in the Windows NT environment.
operating system with greater than 64 MB of RAM.
logy is a technology that enables a PC to attempt to
t Features
e Control settings.
ng using the manual configuration.
(default)
When synchronous DRAM is installed, the number of clock
26
PM266A PRO/ PM266A