Table of Contents
Advertisement
Albatron PX845PEV-800
Supports Socket 478 Intel
Enabling the functionality of Hyper-Threading Technology for your
computer system requires ALL of the following platform
CPU: An Intel
®
Pentium
Chipset: An Intel
BIOS: A BIOS that supports HT Technology and has it enabled
OS: An operating system that supports HT Technology
For more information on Hyper-Threading Technology, go to:
http://www.intel.com/info/hyperthreading
®
Intel
82845PE & 82801DB
®
Pentium
®
4 Processor with HT Technology
®
Chipset that supports HT Technology
®
4 Processor
120410032M1A
Advertisement
Table of Contents
Related Manuals for Albatron PX845PEV-800
Summary of Contents for Albatron PX845PEV-800
- Page 1 Albatron PX845PEV-800 ® Intel Supports Socket 478 Intel Enabling the functionality of Hyper-Threading Technology for your computer system requires ALL of the following platform CPU: An Intel ® Pentium Chipset: An Intel ® Chipset that supports HT Technology BIOS: A BIOS that supports HT Technology and has it enabled...
-
Page 2: Fcc Compliance Statement
Albatron PX845PEV-800 Copyright Copyright © 2003 by Albatron. All rights are reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of the company. -
Page 3: Table Of Contents
CHAPTER 1. GETTING STARTED ... 1 ... 1 NTRODUCTION ... 2 PECIFICATIONS ... 5 UICK ONTENT ABLE ... 6 ONFIGURATION ... 7 ARDWARE NSTALLATION CHAPTER 2. BIOS SETUP ... 22 ... 22 NTRODUCTION ... 24 BIOS F ... 26 DVANCED EATURES ... -
Page 4: Chapter 1. Getting Started
USB devices, and a LAN Chip which supports a back panel LAN port (RJ-45). Albatron PX845PEV-800 contains a “Watch Dog Timer” feature, it is used to detect when the system is unable to handle over-clocking configurations during POST stage. -
Page 5: Specifications
Albatron Anniversary Special Edition PX845PEV-800 Specifications CPU: Supports Socket 478 Pentium Supports Hyper-Threading Technology Speed: 800/ 533/ 400MHz Front Side Bus frequency (FSB 800 is by overclocking or using a 200 MHz Clock Frequency CPU) 33 MHz, 32 bit PCI interface (PCI 2.2 compliant) 66 MHz AGP 2.0 compliant interface, supports 4X transfer modes (1.5V only) -
Page 6: Flash Memory
Albatron Anniversary Special Edition PX845PEV-800 BUS Slots: One AGP slot (4X/ 1.5V only) Five 32-bit PCI bus slots Flash Memory: Supports flash memory functionality Supports ESCD functionality Hardware Monitor Function: Monitors CPU Fan Speed Monitors Chasis Fan Speed Monitors System Voltage... -
Page 7: Watch Dog Timer
Albatron Anniversary Special Edition PX845PEV-800 AGP protection: This mainboard provides an AGP slot only for 1.5V AGP cards. The AGP protection function is to protect the mainboard and AGP cards if a non 1.5V card is installed. I/O facilities: One multi-mode Parallel Port capable of supporting the following specifications: 1. -
Page 8: Quick Content Table
Albatron Anniversary Special Edition PX845PEV-800 Quick Content Table Function CPU Socket 478 DDR DIMM Sockets ATX Power Connectors IDE Connectors FDC Connector AGP Slot PCI Slots CPU FAN,Chassis FAN, Auxiliary FAN Front Panel Indicator Speaker Connector Infrared Connector Front USB Headers... -
Page 9: Configuration
Albatron Anniversary Special Edition PX845PEV-800 Configuration Layout of PX845PEV-800 KB/MS USB/LAN Socket 478 PRT/COM ATX_12V Intel 82845PE AUXFAN Winbond W83627HF PCI1 PCI2 PCI3 CHIP PCI4 PCI5 Phoenix Bios IrDA CPUFAN BAT1 Intel IDE2 IDE1 82801DB CHASFAN CASE OPEN SPEAKER USB2... -
Page 10: Hardware Installation
Albatron Anniversary Special Edition PX845PEV-800 Hardware Installation This section will assist you in quickly installing your system hardware. Wear a wrist ground strap before handling components. Electrostatic discharge may damage your system components. Subject: CPU Processor Installation Memory Installation Back Panel Configuration... -
Page 11: Cpu Processor Installation
Albatron Anniversary Special Edition PX845PEV-800 CPU Processor Installation ® This mainboard supports Intel Pentium Before building your system, we suggest you visit the Intel website and review the processor installation procedures. http://www.intel.com CPU Socket 478 Configuration Steps: 1. Locate the CPU socket on your mainboard and nudge the lever away from the socket. -
Page 12: Fan Headers
Albatron Anniversary Special Edition PX845PEV-800 FAN Headers Three power headers are available for cooling fans, which play an important role in maintaining the ambient temperature in your system. KB/MS USB/LAN So cke t 478 PRT/COM ATX_12V Intel 82845PE AUXFAN Wi nbond... - Page 13 Overclocking example (to FSB 800): have an Intel (133MHz, 13 Ratio) and a DDR 400 RAM module plugged on Albatron PX845PEV-800 mainboard. Adjust the “CPU Host Frequency” to 200 and the “DDR: CPU Ratio” to 2.00 (default) in the BIOS Utility.
-
Page 14: Memory Installation
Albatron Anniversary Special Edition PX845PEV-800 Memory Installation Albatron PX845PEV-800 contains 3 DIMM sockets, which use 184 pin DDR SDRAM with a total memory capacity of up to 2 GB. You can install unbuffered non-ECC DDR 400/ DDR 333/ DDR 266 (PC 3200 /PC2700 /PC2100) SDRAM. - Page 15 Albatron Anniversary Special Edition PX845PEV-800 Memory installation note The Albatron PX845PEV-800 mainboard provides three DIMM sockets which support 184-pin DDR DIMM Modules with a total memory capacity of up to 2 GB. Each DIMM socket is capable of using a memory module containing up to 1 GB. However, if you use DIMM2 and DIMM3 simultaneously, you must use single-sided memory modules with the total memory used by these two sockets not exceeding 1 GB.
-
Page 16: Back Panel Configuration
Albatron PX845PEV-800 also provides two USB headers on the board allowing for 4 more USB ports. These attach to USB connectors embedded into the computer case or connected to a USB connector bracket. Albatron PX845PEV-800 also provides a LAN port. You can plug LAN devices directly into this connector. - Page 17 Albatron Anniversary Special Edition PX845PEV-800 Pin Assignment Pin Assignment Serial and Parallel Interface Ports The PX845PEV-800 comes equipped with two Serial ports and one Parallel port. These types of interface ports will be explained below. COM1 The Serial Interface: COM1/ COM2 The serial interface port is sometimes referred to as an RS-232 port or an asynchronous communication port.
- Page 18 Albatron Anniversary Special Edition PX845PEV-800 Connector Configuration Front Panel Indicator: SW/LED SW/LED Pin Assignment Function Pin Assignment Function HD LED (+) Hard Drive HD LED (-) Reset Control (-) Reset Reset Control(+) Button HD LED (Hard Drive LED Connector) This connector can be attached to an LED on the front panel of a computer case. The LED will flicker during disk activity.
- Page 19 Albatron Anniversary Special Edition PX845PEV-800 SPEAKER (Speaker Connector) An off-board speaker can be connected to this connector. This speaker (onboard or off-board) provides error beep code information during the Power On Self-Test when the computer cannot access the video interface.
- Page 20 Albatron Anniversary Special Edition PX845PEV-800 Floppy Disk Connector: FDC This mainboard provides a standard floppy disk connector (FDC) that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy diskettes. This connector supports the floppy drive ribbon cables provided in the packaging.
- Page 21 Albatron Anniversary Special Edition PX845PEV-800 Headers & Jumpers Front USB Headers: USB2 / USB3 DATA_A- DATA_B- DATA_A+ DATA_B+ Ground Ground USB2 DATA_A- DATA_B- DATA_A+ DATA_B+ Ground Ground USB3 USB Bracket (2 Ports or 4 Ports) You can connect the USB bracket to the USB2 and USB3 Headers.
- Page 22 Albatron Anniversary Special Edition PX845PEV-800 Clear CMOS Jumper: JP1 The “Clear CMOS” jumper is used when you cannot boot your system due to some CMOS configuration such as a password that is forgotten. This jumper allows you to reset the CMOS configurations, and then reconfigure.
- Page 23 AGP (Accelerated Graphics Port) Slot This mainboard is equipped with a Accelerated Graphics Port (AGP) (1.5v only) to support video cards. Albatron PX845PEV-800 also comes with AGP protection which ensures that you only install 1.5V AGP cards. PCI (Peripheral Component Interconnect) Slots This mainboard is equipped with 5 standard PCI slots.
-
Page 24: Power Supply Attachments
Albatron Anniversary Special Edition PX845PEV-800 Power Supply Attachments ATX Power Connector: ATX_12V & ATX_PWR This mainboard requires two ATX power connections; a 20-pin connector and a 4-pin connector, your power supply must have both connectors. Attach the 4-pin connector first, and then attach the 20-pin connector. -
Page 25: Chapter 2. Bios Setup
Albatron Anniversary Special Edition PX845PEV-800 Chapter 2. BIOS Setup Introduction This section describes PHOENIX-AWARD™ BIOS Setup program which resides in the ROM BIOS firmware. The Setup program allows users to modify the basic system configuration. The configuration information is then saved to CMOS RAM where the data is sustained by battery after power-down. -
Page 26: Key Function
Albatron Anniversary Special Edition PX845PEV-800 Supported CPUs This PHOENIX-AWARD™ BIOS supports the Intel Key Function In general, you can use the arrow keys to highlight items, press <Enter> to select, use the <PgUp> and <PgDn> keys to change entries, press <F1> for help and press <Esc> to quit. The following table provides more detail about how to navigate within the BIOS Setup program. -
Page 27: Main Menu
Albatron Anniversary Special Edition PX845PEV-800 Main Menu When you enter the PHOENIX-AWARD™ BIOS Utility, the Main Menu will appear on the screen. The Main menu allows you to select from several configuration options. Use the left/right arrow keys to select a particular configuration screen from the top menu bar or use... - Page 28 Albatron Anniversary Special Edition PX845PEV-800 Main Menu Setup Configuration Options Item Options Date mm dd yyyy Time hh: mm: ss IDE Primary Options contained in Master sub menu. IDE Primary Options contained in Slave sub menu. IDE Secondary Options contained in Master sub menu.
-
Page 29: Advanced Bios Features
Albatron Anniversary Special Edition PX845PEV-800 Advanced BIOS Features First /Second/Third/ Boot Device Select the order in which devices will be searched in order to find a boot device. Options: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2, HDD-3, ZIP100, USB-FDD, USB-ZIP, USB-CDROM, USB-HDD, LAN, Disabled. -
Page 30: Quick Power On Self Test
Albatron Anniversary Special Edition PX845PEV-800 CPU L1 & L2 Cache Make CPU internal cache active or inactive. System performance may degrade if you disable this item. Options: Enabled (default), Disable. Quick Power On Self Test Allow the system to skip certain tests while booting. This will speed up the boot process. -
Page 31: Advanced Chipset Features
Albatron Anniversary Special Edition PX845PEV-800 Advanced Chipset Features DRAM Timing Selectable This item determines DRAM clock/ timing using SPD or manual configuration. Make sure your memory module has SPD (Serial Presence Data), if you want to select the <By SPD>... -
Page 32: Reset Configuration Data
Albatron Anniversary Special Edition PX845PEV-800 AGP Aperture Size (MB) Select the size of the AGP (Accelerated Graphics Port) aperture. The aperture is a portion of the PCI memory address range dedicated for graphics memory address space. Host cycles that hit the aperture range are forwarded to the AGP without any translation. Options: 4, 8, 16, 32, 64 (default), 128, 256. -
Page 33: Cpu Clock Ratio
Albatron Anniversary Special Edition PX845PEV-800 Frequency/Voltage Control Default CPU Voltage (Volt) This item displays the CPU Voltage information which is detected by the system. CPU Voltage (Volt) This item allows you to adjust your CPU core voltage. Options range from 1.100V~1.850V. -
Page 34: Integrated Peripherals
Albatron Anniversary Special Edition PX845PEV-800 Integrated Peripherals INTEL OnChip IDE Device If you highlight the “INTEL OnChip IDE Device” label and then press the enter key, it will take you to a submenu with the following options: On-Chip Primary/Secondary PCI IDE The mainboard chipset contains a PCI IDE interface with support for two IDE channels. -
Page 35: Ide Hdd Block Mode
Albatron Anniversary Special Edition PX845PEV-800 IDE HDD Block Mode Block mode is otherwise known as block transfer, multiple commands, or multiple sector read/write. Select the “Enabled” option if your IDE hard drive supports block mode (most new drives do). The system will automatically determine the optimal number of blocks to read and write per sector. -
Page 36: Onboard Fdc Controller
Albatron Anniversary Special Edition PX845PEV-800 Onboard FDC Controller Select “Enabled” if your system has a floppy disk controller (FDC) installed on the system board and you wish to use it. If you install an add-in FDC or the system has no floppy drive, select “Disabled”. -
Page 37: Power Management
Albatron Anniversary Special Edition PX845PEV-800 Power Management The Power Management Setup Menu allows you to configure your system to utilize energy conservation features as well as power-up/ power-down options. (Note: the 200 Host Frequency CPU do not support S3 mode.) ACPI Suspend Type The item allows you to select the suspend type using the ACPI operating system. -
Page 38: Video Off Method
Albatron Anniversary Special Edition PX845PEV-800 When this option is enabled, each of the ranges are from 1 min. to 1 hr. except for HDD Power Down, which ranges from 1 min. to 15 min. and includes a “disable” option. Note: If you select Min. or Max. Power Saving modes, the “HDD Power Down” value and the “Suspend Mode”... - Page 39 Albatron Anniversary Special Edition PX845PEV-800 Date of Month Alarm You can choose which date of the month the system will boot up. This field is only configurable when “RTC Wake Up” is set to “Enabled”. Time (hh: mm: ss) Alarm You can choose the hour, minute and second the system will boot up.
-
Page 40: Hardware Monitor
Albatron Anniversary Special Edition PX845PEV-800 Hardware Monitor Case Open Warning If your computer case support “Case Open Warning” function, and this function is set to “Enabled” and the case had been previously opened, the system will automatically display alert messages on the screen when you power on your computer. If this function is set to “Disabled”, the system will not show alert messages when you power on your computer even if some other person open the case. -
Page 41: Load Defaults
Albatron Anniversary Special Edition PX845PEV-800 Load Defaults Load System Default Settings Load System Default Settings. Load System Turbo Settings Load System Turbo Settings. Load CMOS From BIOS Load defaults from flash ROM for systems without batteries. Save CMOS To BIOS... -
Page 42: Exit Menu
Albatron Anniversary Special Edition PX845PEV-800 Exit Menu Save & Exit Setup Save all configuration changes to CMOS (memory) and exit setup. A confirmation message will be displayed before proceeding. Exit Without Saving Abandon all changes made during the current session and exit setup. A confirmation message... -
Page 43: Chapter 3: Software Setup
Albatron Anniversary Special Edition PX845PEV-800 Chapter 3: Software Setup Software List Category ® Intel Chipset INF Software ® Intel Application accelerator 3Com LAN Driver Cmedia Sound Card Driver ® Intel ICH4 USB 2.0 Driver Trend PC-Cillin 2002 Acrobat Reader 5.X Software Installation Place the Driver CD into the CD-ROM driver and the Installation Utility will auto-run. -
Page 44: Chapter 4: Troubleshooting
Albatron Anniversary Special Edition PX845PEV-800 Chapter 4: Troubleshooting Problem 1: No power to the system. Power light does not illuminate. Fan inside power supply does not turn on. Indicator lights on keyboard are not lit. Causes: 1. Power cable is unplugged. - Page 45 Albatron Anniversary Special Edition PX845PEV-800 Problem 4: System only boots from the CD-ROM. The hard disk can be read and applications can be used but booting from the hard disk is impossible. Causes: Hard Disk boot sector has been corrupted.
- Page 46 Albatron Anniversary Special Edition PX845PEV-800 Problem 10: Keyboard failure. Causes: Keyboard is disconnected. Solutions: Reconnect keyboard. Replace keyboard if you continue to experience problems. Problem 11: No color on screen. Causes: 1. Faulty Monitor. 2. CMOS incorrectly set up. Solutions: 1.
-
Page 47: Appendix I
Albatron Anniversary Special Edition PX845PEV-800 Appendix I： Cmedia 8738 Sound Card (optional) Specification Cmedia 8738 Audio Chip Supports 2/ 4 channel Supports C3DX audio technology Provides 3D Audio that supports HRTF, DirectSound3D, Aureal A3D Supports EAX audio effect Compliant DLS-base Wavetable music synthesizer Spec. -
Page 48: Appendix Ii
Albatron Anniversary Special Edition PX845PEV-800 Appendix II： This mainboard complies with the ATX standard, which means the ACPI connector on this board is 2-pin. If the Power LED cable of your case uses a 3-pin adapter, you must use the 2-pin to 3-pin adapter (contained in the packaging). -
Page 49: Appendix Iii
Albatron Anniversary Special Edition PX845PEV-800 Appendix III： If you still require assistance after reading this section, please contact us or local distributor. And you can visit our website technical support. Albatron Technology Co., Ltd Address： 6F, No.716, Chung Cheng Rd., Chung Ho City, Taipei Hsien, Taiwan Telephone：886-2-8227-3277...