Table of Contents
Advertisement
PM266A PRO/ PM266A
Run VGABIOS if S3 Resume
Select whether you want to run VGABIOS w
hen the system wakes up from the S3 resume function.
Options: Auto (default)、Yes、No
Wake Up Control
If
you highlight the "Wake Up Control" label and then press the enter key, it will display a submenu
with the following options:
PWRON After PWR-Fail
This option determines whether you want to restart the system after a power failure. Select "On", to
boot the system whether or not the system was on be
fore power failure. Choose Former-Sts, to
re
store the system to the status before the power failure.
Options: Off (default)、On, F
ormer-Sts.
PS2KB Wakeup Select
Use this option to configu
re the PS2 keyboard Wake Up feature.
"P
assword"
Use this selection to force the user to enter a password after the system awakens
from PS2 keyboard activity.
"Hot Key"
Use PS2KB key to awake the system. See "PS2KB Wake Up from S3
-S5" to
configure the hotkey.
PS2KB Wake Up from
S3/S4/S5
This option is used when "PS2KB Wake Up Select" is configured as "
HOT KEY".
Options: Di
sable (default), Ctrl+F1(to F12), Power, Wake, Anykey.
Power Button Lock
This item allows you to l
ock
the power button. Options: Enabled、Disabled (default)
VGA
When set to "On", any event
occurring at a VGA Port will awaken a system which had been
previously powered down. Options: OFF (default)、On.
LPT & COM
When this option is set to On, any event occurring at a COM(serial)/LPT (printer) port
will awaken a
system which has been suspended. Options: LPT/COM (default)、COM、LPT、NONE
37
Hide quick links:
Advertisement
Table of Contents
