Table of Contents
Advertisement
KM400A Series
Typematic Rate (Chars/Sec)
The rate at which a character rep
eats when you hold down a key.
O
ptions: 6 (default)、8、10、12、15、20、24、30
Typematic Delay (Msec)
The delay before keystrokes begin to repeat. Options: 250 (default)、500、750、1000
APIC Mode
By enabling this option, "MPS version control for OS" can be configured.
Options: Disabled、Enabled (default)
M
PS Version Control For OS
T
he 1.1 version is the older version that supports 8 more IRQs in the Windows NT environment.
Choose the new 1.4 version for Windows
2000 and Windows XP.
Options: 1.4 (default)、1.1
OS Select For DRAM > 64MB
Select "OS2" only if you are running the
OS/2 operating system with greater than 64 MB of RAM.
Options: Non-OS2 (default)、OS2
HDD S.M.A.R.T. Capability
Self Monitoring Analysis and R
eporting Technology is a technology that enables a PC to attempt to
predict the possible failure of storage drives. Options: Disabled (default)、Enabled
S
mall LOGO (EPA) Show
This item allows you to sh
ow or hide the small LOGO EPA.
Options: Disabled (default)、Enabled
Advanced Chipset Features
DRAM Clock/ Drive Control
Press <Enter> to enter next page for DRAM Clock/ Drive Control settings.
DRAM Timing
This item determines DRAM clock/ timin
g using the manual configuration.
Options: Manual、Auto (default)
29
Advertisement
Table of Contents
