Table of Contents
Advertisement
K8NF4 Series
Typematic Delay (Msec)
The delay before keystrokes begin to repeat. Options: 250 (default)、500、750、1000
APIC Mode
By enabling this option, "MPS version control for OS" can be configured.
Options: Disabled、Enabled (default)
MPS Version Control For OS
The 1.1 version is the older version that supports 8 more IRQs in the Windows NT environment.
Choose the new 1.4 version for Windows 2000 and Windows XP.
Options: 1.4 (default)、1.1
OS Select For DRAM > 64MB
Select "OS2" only if you are running the OS/2 operating system with greater than 64 MB of RAM.
Options: Non-OS2 (default)、OS2
HDD S.M.A.R.T. Capability
Self Monitoring Analysis and Reporting Technology is a technology that enables a PC to attempt to
predict the possible failure of storage drives. Options: Disabled (default)、Enabled
Small LOGO (EPA) Show
This item allows you to show or hide the small LOGO EPA.
Options: Disabled (default)、Enabled
Advanced Chipset Features
DRAM Configuration
Timimng Mode
This item allows you to select if you want to let the bios detect and use informations in SPD or it's
you to configure those items below. Options: Auto (default)、Manual
Memclock index value (Mhz)
This item allows you to select the memory clock. When it set to "auto", the system will automatically
detected the memory clock. Options: 200、100、133、166
CAS# latency (Tcl)
This item determines CAS Latency. When synchronous DRAM is installed, the number of clock
cycles of CAS latency depends on the DRAM timing. Do not reset this field from the default value
specified by the system designer. Options: 2.0、2.5、3
Min RAS# active time (Tras)
This item allows you to select DRAM Active to Precharge Delay.
Options: Auto、5T、6T、7T、8T、9T、10T、11T、12T、13T、14T、15T
27
Advertisement
Table of Contents
