Active to Precharge (Tras)
This item allows you to select DRAM Active to Precharge Delay. Options: 6T (default)、5T
Active to CMD (Trcd)
Select the DRAM delay time when be
DRAM Comm
and Rate
This item determines DRAM Com
Options: 2T Command (default)、1T Command
A
GP & P2P Bridge Control
Press <Enter> to enter next page for AGP & P2
AGP Aperture Size
Select the size of the Acce
PCI memory address range dedicated for graphics memory address space. Host cycles that hit the
aperture range are forwarded to the AGP with
Options: 256M、128M、64M (default)、32M、16M、8M、4M
A
GP Mode
This item allows you to select the AGP M
Options: 1X、2X、4X
A
GP Driving Control
By choosing "Auto" the system BIOS
By choosing "Manual", it allows user t
AGP Driving Value
While the AGP Driving Control option is set to "Manual", it allows the user to set AGP Driving
Value. Options: DA (default)、00~FF
AGP Fast Write
The AGP Fast Write technology allows the CPU to write directly to the gr
sy
stem AGP 4X speed. Choose "Enable" only when you used with AGP card support.
Options: Disabled、
Enabled (default)
ing read. Options:3T (default) 2T
mand Rate.
P Bridge Control.
lerated Graphics Port (AGP) aperture. The aperture is a portion of the
out any translation.
ode when you install an external VGA card.
will automatically set the AGP output buffer drive strength.
o set the AGP output buffer driver strength.
27
PM266A PRO/ PM266A
、
aphics card bypassing the