Upgrade The Firmware And Reboot The Intercom - CyberData 010935F Operation Manual

4.3 Upgrade the Firmware and Reboot the Intercom

Note
Note
To upload the firmware from your computer:
1. Retrieve the latest Intercom firmware file from the VoIP Intercom Downloads page at:
http://www.cyberdata.net/products/voip/digitalanalog/intercom/downloads.html
2. Unzip the firmware version file. This file may contain the following:
• Firmware file
• Release notes
3. Log in to the Intercom home page as instructed in
Home
Operations Guide
To guard against failed firmware upgrades, units shipped from CyberData with firmware
version 5.1.2 and later feature a built-in "fail safe" mechanism. Note that field upgrading
earlier units with v5.x.x will not allow for this feature.
Any units that have shipped with firmware version 6.0.0 or later will not be able to run
firmware that is version 5.1.2 or earlier.
Page".
930242L
Installing the VoIP Intercom
Section 4.2.2, "Log in to the Configuration
CyberData Corporation
59
Intercom Setup