Call Button And The Call Button Led - CyberData 010935F Operation Manual

4.1.4 Call Button and the Call Button LED

4.1.4.1 Calling with the The Call Button
• You may initiate a call by pressing the Call button.
• An active call is indicated by the Call Button LED blinking at one second intervals.
• The Intercom will automatically answer an incoming call.
• You can press the Call button to terminate an active call whether the call was an incoming call
or a call that was initiated by you.
4.1.4.2 Call Button LED Function
• Upon initial power or reset, the Call Button LED will illuminate.
• When the software has finished initialization, the Call Button LED will blink twice.
• When a call is established (not just ringing), the Call Button LED will blink.
• On the
sets the normal state for the indicator light. The Call Button LED will still blink during
initialization and calls.
• The Call Button LED flashes briefly at the beginning of RTFM mode.
Operations Guide
Device Configuration Page, there is an option called
Figure 4-5. Call Button and Call Button LED
930242L
Installing the VoIP Intercom
Intercom Setup
Button Lit When Idle. This option
Call button and Call Button LED
CyberData Corporation
13