Remote Access Code - Telstra 13500 User Manual

Press SELECT and or
2.
Press SELECT and or
3.
Press SELECT and or
4.
TIME SAVER.
Press SELECT to confirm your selection. You hear a confirmation tone.
5.

REMOTE ACCESS CODE

A four-digit security code is required to access the answering system remotely from
any touch-tone telephone. The preset code is 0000. You can set the code from 0000
to 9999.
To turn ON/OFF the remote access:
Press MENU when the phone is not in use. And then press or
1.
ANS. MACHINE.
Press SELECT and or
2.
Press SELECT and or
3.
Press SELECT and or
4.
Press SELECT to confirm your selection. You hear a confirmation tone.
5.
To change the PIN code:
Press MENU when the phone is not in use. And then press or
1.
ANS. MACHINE.
Press SELECT and or
2.
Press SELECT and or
3.
Press SELECT and enter the old system PIN.
4.
Press SELECT and enter the new system PIN.
5.
Press SELECT and enter the new system PIN again.
6.
Press SELECT to confirm. You hear a confirmation tone.
7.

to scroll to TAM SETTINGS.
to scroll to ANSWER DELEY.
to choose 2 RINGS, 4 RINGS, 6 RINGS, 8 RINGS or
to scroll to TAM SETTINGS.
to scroll to REMOTE ACC..
to choose ON or OFF.
to scroll to TAM SETTINGS.
to scroll to CHANGE PIN.
to scroll to
to scroll to