To set the low battery tone:
Press MENU when the handset is not in use.
1.
2.
Press or
Press SELECT and or
3.
Press SELECT and or
4.
Press SELECT and or
5.
Press SELECT to save your selection. You hear a confirmation tone.
6.
NO COVERAGE TONE
When a handset is out of range of the telephone base, an alert tone will be emitted if
no coverage tone is set to ON, You need to move the handset closer to the telephone
base.
To set no coverage tone:
Press MENU when the handset is not in use.
1.
2.
Press or
Press SELECT and or
3.
Press SELECT and or
4.
Press SELECT and or
5.
Press SELECT to save your selection. You hear a confirmation tone.
6.
AUTO ANSwER
This feature allows you to answer a call by lifting the handset off the base if you have
set the auto answer to ON.
To reset the auto answer:
Press MENU when the handset is not in use.
1.
2.
Press or
Press SELECT and or
3.
Press SELECT and or
4.
to scroll to HS SETTINGS.
to scroll to TONE SETUP.
to scroll to BATTERY TONE.
to select ON or OFF.
to scroll to HS SETTINGS.
to scroll to TONE SETUP.
to scroll to OUT OF RANGE.
to select ON or OFF.
to scroll to HS SETTINGS.
to scroll to AUTO ANSWER.
to select ON or OFF.