Telstra 13500 User Manual page 39

Notes:
If Off is selected, Power Fail Back-Up mode will not be enabled.
•
If AUTO is selected, the registered handset(s) will display TO PWR UP BS
•
PUT IN CRADLE when mains power interruption occurs. Place the handset
with sufficient battery power (usually not lower than level 2) onto the main
base unit to activate Power Fail Back-Up and start up the base. If handset
is already on the main base unit it will automatically activate the Power
Fail Back-Up mode (if it has sufficient battery power) and start up the
base. If AUTO is selected and handset is not returned to base unit within
approximately 2 minutes the handset will temporarily revert to Manual mode
to converse battery power.
If MANUAL is selected, the registered handset(s) will display TO PWR UP BS
•
PRESS TALK OFF when mains power interruption occurs. Press
place the handset onto the main base unit to activate the Power Fail Back-
Up mode and start up the base.
• Power Fail Back-Up mode will not work if the handset battery power is not
sufficient (usually not lower than level 2).
• Do not pick up the power supplying handset from base when Power Fail
Back-Up mode is activated.
• Do not touch the charging contacts of the power supplying handset during
Power Fail Back-Up mode.
• In Power Fail Back-Up mode none of the base functions, including the
answering machine , of your Telstra cordless phone will operate.
• It may take up to 90 seconds to transition through the Power Fail Back-Up
activation process as the base and handset(s) synchronise with each other.
Make a call using Power Fail Back-Up mode
If there is only one handset registered to the base:
1. Once the handset is placed onto the main base unit, enter the telephone
number, and then press
automatically and call is made.
or . The speakerphone will be turned on
and then