Message Window Displays; Remote Access - Telstra 13500 User Manual

MESSAGE wINDOw DISPLAYS

Window display
00
01-99
00-99
(flashing)
01-99 FF
&
(alternating)
L1-L8
A n & 01-99
(alternating)
- -

REMOTE ACCESS

A four-digit security code is required to access the answering system remotely from
any touch-tone telephone. The preset code is 0000. See Remote access code on
page 62 to change it.
Note: Remote access can only be used if this function is activated.
1. Dial your telephone number from any touch-tone telephone.
2. When the answering system answers, press
remote access code.
3. Then you can enter one of the following remote commands.

No messages.
The total number of old messages and memos recorded.
The message number currently playing.
The total number of new messages recorded, or the current
message number during new message playback.
The clock needs to be set.
The answering system memory is full with total number of new
messages recorded.
The telephone base speaker volume level while adjusting.
The answering system is answering a call, or recording a
memo or announcement.
The answering system is being accessed remotely.
The answering system is turned off.
Description
and then enter the four-digit