Edit An Event Timer - Dish Network 500 Instructions Manual

Chapter 3
Using the System

Edit an Event Timer

• You can edit any type of event timer.
• You can change any feature of an event timer.
• When you edit an automatic event timer you change it to a manual event
timer. A manual timer works at the times you set, which don't have to be the
actual program times.
• You can change one type of event timer to any other type of event timer and
back, within the limits on each type of timer. Each type of timer has its own
limits, so please be careful! Also, you can't change a manual timer to an
automatic timer.
Here's what to do:
1. Press the MENU button.
2. Select the
3. Select the event timer you want to edit. A
4. Select the
5. You can change the
6. Only for a Once (one-time), PVR Event Timer,
Page 54
option.
Timers
This opens the
Event Timer Management
check mark shows up in the box next to
the event timer. For example, here we
selected a PVR event timer.
option.
Edit
This opens the
Edit a Manual Event Timer
Timer Type
this, select each option you want.
you can select the
Protect Recording
If you do this, a check mark shows up in the box.
When you protect a recorded program, the receiver will ask you
Note:
before it records over that program.
menu.
menu.
, , or
Timer Frequency Channel
check box.
. To do