Menu Button; Mute Button - Dish Network 500 Instructions Manual

Power Buttons
Press the blank POWER button to turn the receiver on or off.
Use the TV POWER button to turn the TV on or off. See Set
Up the Remote to Control Other Devices for instructions on
programming the remote to control your TV.

Menu Button

Press this button to open the
TV/Video Button
If you connect a second video source, such as cable or a broadcast
antenna, to the receiver's back panel TV A
you can use this button to switch the receiver between the satellite
signal and another video signal.
The signal from the second video source will only be available on the TV
Note:
S O port, not on the S-V
ET UT
Page Up and Page Down Buttons
Press the PAGE UP button or the PAGE DOWN button to
scan, page by page, through the
list, a , an
Favorite List
channels.

Mute Button

Press this button to turn the TV sound off or on. To use this button,
you must set up the remote to control the TV. See Set up the Remote
to Control Other Devices on page 68 for instructions.
Volume Button
Press this button to change the TV volume. To use this
button, you must set up the remote to control the TV.
Please see Set Up the Remote To Control Other
Devices on page 68 for what to do.
Guide Button
Press this button to open the
open, press this button to apply your Favorite Lists.
Program Guide
Arrow Buttons
• Press these buttons to highlight an option in the
menus, the Program Guide, and the Browse
Banner.
• While watching a program, press the UP or
DOWN ARROW button to change channels.
Press the BROWSE button (the RIGHT
•
ARROW button) to open the
.
Main Menu
NTENNA
or RCA output connections.
IDEO
Program Guide
list, or a list of
Event Timers
. When you have the
Program Guide
Browse Banner
/C I port,
ABLE N
, a
Themes
.
Remote Control
Tip: The Guide
button opens
the Program
Guide. Use it
to get
information on
programs that
are on now
and that will
be on in the
future.
Page 23