Table of Contents
Advertisement
Chapter 8
Timers
T
IMERS
A timer is your instruction telling the satellite receiver the programs you want to view in the future.
For most VCR timers, you select a specific program on a specific channel, and tell the satellite
receiver how often you want to record that program. Be sure to set up the receiver to control your
VCR (see page 75).
Timer Types
There are three types of timers:
•
VCR - Records an event on a previously inserted tape for later viewing. Make sure you have
your VCR connected and turned on when using this type of timer. Also, be sure to set up the
receiver to tell the VCR to start/stop recording.
•
Auto/Ext. - Automatically changes the channel for live viewing of the event. Use this setting to
record to a portable media device. Connect the device to the receiver's RCA Outputs (see
page 12). Be sure to read the guide that came with the device for setup and recording
instructions.
•
Reminder - Creates an on-screen reminder when the event is about to air.
Timer Frequency
Deciding how often you want to watch a program will help you make the best choice:
•
Once - Records a program once (good for movies, sporting events, etc.).
•
Weekly - Records a program once a week, at that time, on that channel.
•
Daily - Records a program once a day, at that time, on that channel.
•
Monday-Friday - Records a program once a day, Monday through Friday, at the selected
time, on that channel.
Timers List
Use the Timers List as described on page 42 to:
•
View the general list of timers.
•
Create a Manual timer.
•
Edit a timer.
40
Advertisement
Table of Contents
Troubleshooting
