Dish Network 500 Instructions Manual page 77

Up/Down Arrow Buttons
Use these buttons to change channels on the TV.
: These buttons do not change channels on the TV if the
Note
remote control is in limited mode.
Select Button
The SELECT button works as the ENTER button for a TV.
Recall Button
Press this button to go back to the last TV channel you watched.
Press it again to switch between the last two TV channels you
wanted.
Number Buttons
Use these buttons to directly enter numbers in a
different channel.
: These buttons do not change the channels on
Note
the TV if the remote control is in limited mode.
Control a VCR (or a Second VCR)
Only the buttons described here control a VCR or DVD player. Some
of the buttons we tell you about here may not control your VCR or
DVD player. Please see the user's manual that came with your VCR or
DVD player for information about the VCR's features.
VCR Mode Button
You must first set up the remote to control the VCR. Please see Set Up
the Remote to Control Devices, beginning on page 68. Then, you must
press the VCR mode button to set the remote to VCR mode. The VCR mode
button flashes once to show you've set the remote to VCR mode. Make sure
you keep the remote in VCR mode to use the buttons we tell you about here.
You can set up the remote to control a second VCR in AUX mode, the
Note:
same way it controls the first VCR in VCR mode. Please see Set Up the Remote
to Control Devices beginning on page 68.
You must set the remote to VCR mode to set it up to control a DVD
Note:
player. Once you do this, you must set the remote to VCR mode to control a
DVD player.
Control Other Devices with the Remote
Page 73