Dish Network 500 Instructions Manual page 111

D D S
OLBY IGITAL OUND
What's
Happening
R
Instead of Dolby • Maybe the program you're watching
Digital sound, you doesn't have Dolby
hear only regular
• Maybe you selected the wrong sound
stereo or non-stereo
option on the Dolby Digital Setup
sound.
menu.
• Maybe the amplifier/decoder can't
process Dolby
• Maybe you didn't connect the receiver
to an amplifier/decoder.
E T
VENT IMERS
What's
Happening
You want to use You highlighted a future program in the
Browse Banner, in the Program
Quick Record, but
Guide, or in a Themes list, and then
the receiver displays
the Create an pressed the SELECT button.
Event Timer
menu.
You try to set an You must enter the password before you
event timer and the can set an event timer for a locked program.
receiver displays a
message that the
program is
locked.
You try to set an You must order a pay per view event before
event timer and the you can set an event timer for it.
receiver displays a
message that the
program is
a pay per view
event.
You try to set an You've already set as many event timers
event timer, but the as you can.
receiver displays an
Error message that
gives you the choice
to delete an event
timer you set
earlier.
You set an event Maybe you set a Reminder Event Timer
timer, but the but you should have set a DVR Event Timer,
receiver doesn't an Auto-Tune Event Timer, or a VCR Event
tune to the channel Timer.
of the program, or
doesn't record the
program.
What's Wrong
R
Digital sound.
R
Digital sound.
What's Wrong
Use the Trouble-Shooting Tables
What You Can Do
• Not all programs have Dolby
Program Guide entry for the (DD) mark.
• On the Dolby Digital Setup menu, select the Dolby Digital Only
option if the amplifier/decoder can process only Dolby
the PCM Only option if the amplifier can't process Dolby
the Dolby Digital/PCM option only if the amplifier can process both
R
regular and Dolby Digital sound. Note: If you select the
Dolby Digital/PCM option and the amplifier/decoder can't process
R
Dolby Digital, you could damage the speakers.
• If the amplifier/decoder can't process Dolby
R
Dolby Digital sound. Please see the amplifier user's manual or call your
audio electronics dealer for more info.
• Make sure you connect an amplifier/decoder that can process Dolby
Digital sound to the receiver's back panel Dolby
What You Can Do
To use Quick Record, highlight a future program but don't press
the SELECT button. Instead, press the RECORD button.
Note: You can use the Create an Event Timer menu if you want,
because it's almost as fast as Quick Record.
First enter the password, then you can set an event timer for the program.
First order the event, then you can set an event timer for it.
Delete one of the event timers you set earlier, and then you can set
a new event timer.
Remember, a Reminder Event Timer just reminds you the program is about
to start. An Auto-Tune Event Timer reminds you and tunes the receiver to the
channel of the program. A VCR Event Timer reminds you, tunes the receiver,
and starts the VCR to record. A DVR Event Timer reminds you, tunes the
receiver, and starts the receiver to record with the DishDVR features.
Note: The receiver won't turn the VCR on, so you must leave it turned on.
R
Digital sound. Check the program's
R
Digital signals,
R
Digital, and
R
Digital, it won't provide
R
Digital output.
Page 107
R