Dish Network 500 Instructions Manual page 76

Chapter 3
Using the System
Remote Control Buttons
Control the Receiver
Control a TV (or a Second TV)
Tip: If you set
You must first set up the remote to control the TV. Please see Set Up
up the remote
the Remote to Control Devices, beginning on page 68. Then, you must
to control a TV,
press the TV mode button to set the remote to TV mode. The TV mode button
the MUTE and
flashes once to show you've set the remote to TV mode. Make sure you keep
VOLUME
the remote in TV mode to use the buttons we tell you about here.
buttons will
control the TV
Note:
volume when
same way it controls the first TV in TV mode. Please see Set Up the Remote to
you're in most
Control Devices beginning on page 68.
other modes.
If the TV has video format options, use this button to switch the
TV video format.
Press either Power button to turn the TV on or off.
Note:
and another TV in Aux mode, press the TV Power button to
control only the TV you set up in TV mode.
Press this button to turn the sound on or off.
Press this button to raise (+) or lower (-) the TV
volume.
Page 72
When you get the remote it's already set up to control the receiver.
But, you must set up the remote to control the TV before you can use
the MUTE and VOLUME buttons.
For info on the remote buttons that control the receiver, please see
Remote Control on page 20.
Only the buttons we tell you about here control a TV. Some of the
buttons we tell you about here may not control your TV. Please see
your TV user's manual for info about the TV's features.
TV Mode Button
You can set up the remote to control a second TV in Aux mode, the
TV/Video Button
Power Buttons
If you set up the remote to control one TV in TV mode
Mute Button
Volume Button