Setting Image Parameters - Siemens SISTORE MX User Manual

10.8

Setting image parameters

Siemens Building Technologies
Fire Safety & Security Products
NOTE
It depends on the type of camera whether or not and which image parameters can be set.
In this dialog, you can change the display quality of the live images and the
recording quality.
Prerequisite:
You are logged into SISTORE MX and the display mode is opened.
1. Right-click on the live image of the required camera.
The context menu will open.
2. Select Settings in the context menu.
The following window will appear:
Fig. 18 Setting image parameters in the "display mode"
Camera parameters
1 Brightness
2 Contrast
3 Colour saturation
3. Move the slide controls to the desired positions.
4. Click OK.
The settings have been saved.
Black & white mode
When black-and-white mode is activated, the slide control for colour saturation
(3) is disabled and the images of the selected camera are displayed in black and
white.
1. Mark the checkbox black & white.
2. Move the slide controls for brightness (1) and contrast (2) to the desired
positions.
3. Click OK.
The settings have been saved.
Display mode functions
39
01.2008