Virtual Guard Tour; Configuring The Virtual Guard - Siemens SISTORE MX User Manual

SISTORE MX RemoteView
19.8

Virtual guard tour

19.8.1 Configuring the virtual guard

106
Siemens Building Technologies
Fire Safety & Security Products
The virtual guard performs the following tasks:
Time-controlled, automatic connection to various recording systems in a specific
–
order
Display predefined cameras
–
Terminate connections after a preset time
–
The connection data are taken from the address book.
Prerequisites
The SISTORE MX RemoteView application software has been started.
Connections that have been set up are listed in the address book.
1. Select the menu sequence File -> Connect.
The Address book dialog box appears.
Fig. 61 SISTORE RemoteView address book
2. Activate the option Show all.
The columns Duration, Cameras, Server name/IP address, Port, RAS
Phone number will be displayed.
3. Select the desired connection in the address book.
4. Set a connection duration in seconds in the Duration column.
5. In the Cameras column, select the cameras whose images are to be
displayed after the connection has been set up.
See Section "Select cameras", page 100.
6. Change the sequence of the connections using the buttons Move up and
Move down .
7. Click OK.
The address book is closed.
The selected connections are now copied by name into the guard function.
NOTE:
Clicking the button Delete all entries deletes the entries from the address book.
and
01.2008