Backup; Export Of Cdm Data - Siemens SISTORE MX User Manual

Playback

17.16.8 Backup

17.17 Export of CDM data

86
Siemens Building Technologies
Fire Safety & Security Products
A backup of recordings, similar to the raw data extraction with SISTORE MX
RemoteView, can be carried out in the replay level of the SISTORE MX server for
a prescribed period and a list of cameras.
A time range must be marked in the time line for this. Use the menu File ->
Backup on hard disk / Network ... to open a dialog where the backup directory
has to be specified. A backup is possible during current recording.
NOTE:
A backup is always file-oriented, i.e. only complete video files can be copied. For this reason, a
backup usually contains more images than has been specified by the range marking in the timeline.
Depending on the utilization of the system (number of cameras to be recorded) and
the number and size of the files to be saved, the backup process may take up to
one hour.
There are several possibilities to export cash dispenser images:
Print scene
The image currently displayed will be printed.
Save scene as BMP or JPG file
When saving individual images (bmp or jpg), an additional ASCII file is created
which contains the relevant cash dispenser data as text. The data of each field is
written to a separate line in the following form: "notifier:
quotations marks).
Save film sequence as AVI file
When exporting cash dispenser recordings to AVI files with, only one event
(alarm ID) can be exported per AVI file. This is because only one event can be
selected in the cash dispenser playback dialog at a time, as opposed to
playback from the timeline where several events can be combined. AVI export is
also possible from the RemoteView client.
Remote raw data extraction
Remote raw data extraction is always started from the timeline (selection of a
time range). Cash dispenser recordings will also be extracted. The cash
dispenser recordings can afterwards be viewed offline on the SISTORE MX
RemoteView client.
value" (without
01.2008