Searching For A Sistore Mx Server - Siemens SISTORE MX User Manual

SISTORE MX RemoteView

19.5.8 Searching for a SISTORE MX server

102
Siemens Building Technologies
Fire Safety & Security Products
4. Tick the checkbox next to the desired camera.
5. Repeat this step until you have selected the required cameras.
NOTE:
The options no camera and all cameras provide an option for editing the camera list quickly.
It is not possible to select cameras if there is no connection to the server.
6. Click Apply.
The settings will be saved.
You can search for SISTORE MX servers in the address book with the Search
button. Using the Scan network button you can search for MX servers in the
network.
Prerequisites:
The SISTORE MX RemoteView application software has been started.
–
The address book is opened in the SISTORE MX RemoteView application
–
software.
See Section 19.5.1 Open address book, page 96.
There are two possible ways to search for a SISTORE MX Server:
1. Click Search.
– Or –
Enter the port in the TCP/IP Port text field.
The address book will be searched for SISTORE MX Servers.
All existing SISTORE MX Servers on the network will be displayed.
NOTE:
The search is carried out for only one specified port. If there are SISTORE MX servers in the local
network with different ports, a search will have to be made for each port. This function is currently only
available for class C networks yyy.yyy.yyy.xxx (yyy are fixed, xxx variable).
2. Click the Search network button.
3. Answer Yes in the confirmation dialog.
The local network will be searched for SISTORE MX Servers.
All SISTORE MX Servers that are not yet listed in the address book will be
entered there automatically.
NOTE:
In view of the restrictions of the operating system version Windows XP ServicePack 2, the Search
network procedure can take several minutes.
01.2008