Display Live Image Of The Camera Which Triggered The Alarm; Connection Protocol - Siemens SISTORE MX User Manual

19.10.3 Display live image of the camera which triggered the alarm

19.11 Connection protocol

Siemens Building Technologies
Fire Safety & Security Products
Prerequisites:
The alarm details are shown (see Section "Show alarm details")
1. Click the button.
The live image of the camera which triggered the alarm will be displayed.
NOTE
If the camera is assigned an audio channel there will also be live sound.
All images that the user has received during remote connection from a SISTORE
MX recording system are stored with the help of this function. It is unimportant
whether these images were requested using the preview or the playback function.
The image size is 384 x 288 irrespective of the transmitted image size. All received
images are scaled up/down to this size and stored. The quality of the stored
images, naturally, cannot be better than that of the received images – the opposite,
however, does apply.
The function must be enabled by the user. The directory where these AVI files are
to be stored can also be specified by the user. To do this, proceed as follows:
Terminate all connections.
Select the menu sequence Administration -> Configure RemoteView.
Activate connection protocol and enter/change path.
The system generates AVI files, the names of which have the following format:
YYYY-MM-DD_hh-mm-ss_XXXXX_YYYY.AVI
Explanation:
YYYY-MM-DD_hh-mm-ss: Date (Year, Month, Day, Hour, Minute, Second)
XXXXX:
YYYY:
The AVI files can be reproduced using SISTORE Player.
of connection set-up
Name of distant station (from the address book)
Serial number
SISTORE MX RemoteView
01.2008
109