Siemens SISTORE MX User Manual page 111

Siemens Building Technologies
Fire Safety & Security Products
The video files are transferred as direct copies of the original. This is why a slightly
larger period of time may be saved in the video files than was specified by the
user.
The connection to the server can be disconnected once all files have been
transmitted. Using SISTORE MX RemoteView it is then possible to open the
database SISTORE_Backup.vdb offline. All known analysis possibilities are now
available.
NOTE:
Following a backup and subsequent evaluation, the cameras will be counted from 65 to 96
(corresponding to 32 IP cameras).
If the connection to the server is interrupted while the video data is being copied or
if copying is aborted by the user, it is possible to continue transfer of the missing
video data at a later date. This is achieved by setting up a connection again to the
same SISTORE MX server and switching to playback. Without having to mark any
range beforehand in the timeline, data extraction can be started again immediately
from the menu File -> Backup.... Specify the same directory where the previously
aborted data extraction is saved. SISTORE MX
RemoteView now analyses the database "SISTORE_Backup.vdb" that is stored
there and requests the missing files from the server.
NOTE:
Please note that the missing files can no longer be copied if they have been deleted in the meantime
by the server. In addition, a connection with the same server system has to be set up as before.
SISTORE MX RemoteView
01.2008
111