Siemens SISTORE MX User Manual page 55

Siemens Building Technologies
Fire Safety & Security Products
Multi-user PTZ control
Click on the camera window to activate the camera control functions. The colour of
the frame around the camera picture and of the PTZ symbol now change to yellow,
which means that you have control of the PTZ control functions.
If the camera is currently being controlled by another user, the following message
is displayed:
Fig. 28 Multi-user PTZ control - Notification
This message contains information on who is currently controlling the camera. If
the camera is currently being controlled by a user it will be blocked for all other
users. The blocking is terminated when ...
the other user has logged off.
a certain period of time has expired after the last PTZ control command was
sent to the camera. This period of time can be defined - please refer to the
Configuration Manual.
the automatic preset PTZ positions cycle is activated
Users without any control of the PTZ control system can see the graphic control
elements but they are inactive.
These control possibilities are also available in SISTORE MX RemoteView.
However, only one camera can be controlled at a time.
A remote user cannot take over control from any other remote user.
NOTE:
Activate the option „Auto Logout" in the system configuration dialog.
External devices
55
01.2008