Configuring The Video Display Area - Siemens SISTORE MX User Manual

19.17.1 Configuring the video display area

Siemens Building Technologies
Fire Safety & Security Products
NOTE:
If SISTORE MX is not configured to begin immediately after a restart with the recording, no recording
will take place after reboot.
However, the recording can be started via remote control at any time.
Select the desired video display mode in the View menu.
Fig. 66 SISTORE Remote View – "View" menu
Auto. matrix
1 – 64 cameras
Event view
Map
Less cameras
More cameras
Full screen
Statusbar visible
System information visible
SISTORE MX RemoteView
The display area is split automatically.
Up to 64 cameras can be selected to be viewed
simultaneously, depending on the number of
cameras configured.
The event window is opened.
The site plan is opened.
The number of camera pictures displayed is
reduced.
The number of camera pictures displayed is
increased.
The video display area switches to full-screen
mode.
Displays the status bar.
Displays system information.
115
01.2008