Siemens SISTORE MX User Manual page 54

External devices
54
Siemens Building Technologies
Fire Safety & Security Products
Camera control using graphic control elements
Prerequisite for the use of the graphic control elements:
The PTZ camera has been configured and initialised correctly (COM Port free)
The user is logged on and has "Remote control" and "Display" authorisations
The fact that the control elements are displayed is no guarantee that the camera is
functioning.
Function
Motion left, right, up, down, up right, down right,
up left, down left
Zoom in
out
Focus far
near
The auto-focus mode is activated again automatically with a pan-tilt command.
Under the PTZ control element, there is a selection list
configured positions (max. 32) are listed with position names. The system goes to
a position if it has been selected.
Movement to the first 5 stored set positions is possible using the control elements
to . The position names are also displayed with these control
elements.
Pushing the button , the PTZ camera will move to the stored position
automatically in an adjustable time.
The PTZ symbol is bordered in yellow in the live image of the camera currently
being operated by the control system and the window is given a yellow surround.
Non-active PTZ cameras are marked with a grey PTZ symbol. If several cameras
can be controlled, a click with the left mouse button in the window of a camera
activates the PTZ control for that camera.
Camera control using the keyboard
The following key commands are available for PTZ control:
Function
Motion left, right, up, down
can be used with the number pad switched off: (Num
Lock off)
up left
up
up right
left
centre
right
down-left
down
down-right
Zoom in
out
Focus far
near
Key
Travel keys
(arrows)
where all
Key
Cursor
keys
7
8
9
4
5
6
1
2
3
+
-
0
,
01.2008