Changing The Number Of Cameras Shown; Enlarging Camera Windows - Siemens SISTORE MX User Manual

Getting started
9.7.1

Changing the number of cameras shown

9.7.2

Enlarging camera windows

30
Siemens Building Technologies
Fire Safety & Security Products
The meaning of the acronyms is as follows:
Acronym Meaning
STOP Camera image is only displayed
DET Motion detection is activated
REC Camera is recording
PTZ (yellow) The camera has pan/tilt and zoom functions and is currently active. The window of
an active PTZ camera has yellow edging.
PTZ (grey) The camera has PTZ function, but is not active, i.e. the PTZ function is not being
applied to this camera.
DISP The live image of a LAN camera is displayed.
Prerequisites:
The SISTORE MX application software has been started.
You are logged into SISTORE MX..
(See Section 9.2: Login)
1. Select the desired menu option
The selected number of cameras are shown in the video display area.
Increase or reduce the number of cameras shown
1. Click either or
The number of cameras shown is increased or reduced.
The window split is defined within the "configuration mode", which is automatically
active after starting SISTORE MX.
Each camera window can be enlarged and displayed centrally.
1. Right-click on the corresponding video image in the video display area.
The context menu will open.
2. Select
Full screen
– OR –
Double click the left mouse button on the corresponding video image.
The video image is displayed in full screen mode.
Return to normal screen
1. Double click the left mouse button on the camera picture displayed in full
screen mode.
The video image is displayed in the normal screen mode.
NOTE
The size of the video image is limited by the size of the camera window. If the picture supplied by the
camera is larger than the display area, it will be scaled down to an appropriate size so it can be
displayed in the camera window. Only one camera window can be enlarged at a time.
X cameras
in the toolbar.
in the .
context menu
in the menu.
View
01.2008