Siemens SISTORE MX User Manual page 10

Safety
10
Siemens Building Technologies
Fire Safety & Security Products
Disregarding safety regulations
The products are designed for proper use and are checked before delivery to
ensure that they are in good working order. Siemens assumes no liability
whatsoever for damages or bodily injuries resulting from misuse or disregard of the
instructions or hazard information in the documentation.
This applies especially in the case of
Personal injury or damage resulting from improper use and/or use for purposes
other than those for which the product is intended
Personal injury or damage resulting from non-observance of the safety
information in the documentation or on the product (labelling).
Personal injury or damages as a consequence of inadequate maintenance or
failure to perform maintenance.
Conventions
When used for operation according to the UVV (accident prevention regulations for
banks), the SISTORE MX must be installed and configured with observance of BGI
819-7 (installation guidelines for optical room surveillance systems).
Important information for observance of "BGI 819-7" guideline
It is not permissible to hide all cameras; this particularly applies to those in the
counter area.
Work on the system which interferes with recording may only be carried out
when there is no business at the cash desks, i.e. outside opening hours or
immediately after a holdup.
A customized system using Microsoft Windows is used for digital image
recording. This system is only available for the SISTORE MX application
software; it cannot be used for other Windows applications.
To prevent data losses due to power failure, the device should have a self-
contained power supply.
Performance testing and troubleshooting must be carried out with observance of
BGI 819-7 (testing of optical room surveillance systems).
01.2008