Start/Stop Recording; Sistore Mx Remoteview Alarm List (Optional); Show Alarm Details; Acknowledge Alarm List Entry - Siemens SISTORE MX User Manual

SISTORE MX RemoteView
19.9

Start/stop recording

19.10 SISTORE MX RemoteView alarm list (optional)

19.10.1 Show alarm details

19.10.2 Acknowledge alarm list entry

108
Siemens Building Technologies
Fire Safety & Security Products
Using SISTORE MX RemoteView, it is also possible to start or stop the SISTORE
MX server by remote access, on the condition that you have "Start/Stop"
authorisation as well as "Remote access" authorisation.
Starting and stopping is carried out in the same way as in SISTORE MX, either via
the menu Action -> Start/Stop Recording or by clicking the Rec or Stop buttons.
In order to enable the use of the alarm lists of the connected servers in SISTORE
MX RemoteView, the following settings have to be made:
At the server end, the options Alarm list entry and Alarm connection must be
activated.
(For more information please refer to the SISTORE MX Configuration Manual,
Section 20.3.1 General information about recording modes)
In the SISTORE MX RemoteView system configuration, the option Use alarm
list must be activated.
(For more information please refer to the SISTORE MX Configuration Manual,
Section 29.8.1 Initial display mode selection)
In SISTORE MX RemoteView, you can display the following information on each
alarm:
Date and time of the alarm
Camera which triggered the alarm
Text of the alarm message
Alarming server
Prerequisites:
The alarm list is displayed.
There is at least one entry in the alarm list.
1. Double click on the desired entry in the alarm list.
The alarm details data will be shown.
Prerequisite:
The alarm details are shown (see Section "Show alarm details" above)
1. Enter your comment in the
2. Click the button.
The comment you have entered will be saved to the SISTORE MX
RemoteView logbook.
The comment you have entered will be saved to the logbook of the associated
SISTORE MX server.
The alarm will be removed from the alarm list.
User comment text field.
01.2008