Step 2: Connect To The Internet - Sierra Wireless AirCard 763S Quick Start Manual

Step 2: Connect to the
Internet
1. Press and hold the Power key for a
few seconds. Once powered up, the
mobile hotspot automatically connects
to the mobile broadband network.
The fi rst time you turn on the mobile
hotspot, you'll be asked to select a language on the LCD.
After that, you can change the language on the homepage.
2. The LCD screen displays the message "Connect your
computer to Wi-Fi network" and shows you the Wi-Fi SSID
(Network name) and Wi-Fi Passphrase.
SSID: AirCard-xxxx
To con
go to
Note: The LCD screen goes into sleep mode to save power. To
wake up the LCD screen, press and release the Power key.
3. On your computer or mobile device, open your Wi-Fi /
network connection manager.
4. Select the Wi-Fi SSID displayed on the LCD screen.
5. When prompted, enter your Wi-Fi Passphrase, as it appears
on the LCD screen.
When the computer or mobile device connects to the mobile
hotspot, a '1' appears beside the Wi-Fi icon on the LCD
screen.
6. Launch your browser and, if desired, go to http://rogers.
hotspot to personalize your settings. (Note: The mobile
hotspot is completely secured using its default security
settings.)
7. Optional step: Depending on your service provider, you may
need to create a profi le to connect to the mobile broadband.
Follow the instructions on page 10.
Rogers
re y
4