Figure 2-16 Metal Cover Alignment Mark - HP 9000 rp3440 Installation Manual

Installing and Configuring
Removing and Replacing System Covers and Bezels
b. Rotate the blue release handle to release the latch.
c. Slide the cover toward the back of the chassis and lift the cover off (Figure 2-15).
CAUTION
Replacing the Metal Covers
Step 1. Replace the metal cover:
CAUTION
a. Align the front edge of the metal cover with the alignment mark on the optical drive bay
(Figure 2-16).

Figure 2-16 Metal Cover Alignment Mark

32
The HP server depends on the access panels being closed for proper cooling of
internal components. Operating the system with the cover removed can cause the
system to quickly overheat.
Secure any wires or cables in your system so they do not get cut or interfere with the
replacement of the cover.
To replace cover,
align front edge here
then slide forward
Chapter 2