Table of Contents
Advertisement
Figure 3
shows DVI cards installed as an example.
#
Feature
1
AC Mains Power Module
2
IN 1~16 Connectors
3
IN 17~32 Connectors
4
TEST Module
5
RESOLUTION DIP-switches
6
RS-232 9-pin D-sub Port
7
NET Ethernet RJ-45
Connector
8
OUT 1~16 Connectors
9
OUT 17~32 Connectors
10
PATTERN Button
11
Test Module Output
Connector
VS-3232DN - Defining the VS-3232DN 32x32 Digital Matrix Switcher
Function
Fuse holder and power cord socket. Connect to the AC mains supply
Connect to the relevant video sources, depending on the cards installed (1 to 16, see
Connect to the relevant video sources, depending on the cards installed (17 to 32, see
Signal generator module for testing video outputs (see
Set the resolution for video generated by the Test module (see
Connects to the remote operation PC or remote controller (see
Connect to a PC or controller via the Ethernet LAN (see
The LINK LED flashes when communication is active. The POWER LED lights when the interface
receives power
Connect to the relevant video acceptors, depending on the cards installed (1 to 16, see
Connect to the relevant video acceptors, depending on the cards installed (17 to 32, see
Press the button repeatedly to change the video pattern generated by the Test module (see
Section 10.3
)
Connect to one of the relevant video inputs to aid in troubleshooting (see
Section 10
)
Section 10.2
)
Section 6.1
)
Section 6.4
).
Section
9
Section 6
)
Section 6
)
Section 6
)
Section 6
)
10.4)
Advertisement
Table of Contents
Need help?
Do you have a question about the VS-3232DN and is the answer not in the manual?