Web Browser - Advantech EKI-7556MI User Manual

16+2 100fx port managed redundant industrial ethernet switch (wide temp.)
Table of Contents

Advertisement

3.3 Web Browser

EKI-7556MI provides a convenient configuring way via web browser. You can follow the steps below to
access EKI-7556MI.
EKI-7556MI's default IP is 192.168.1.1. Make sure your host PC and EKI-7556MI are on the same logical
sub-network.
Warning
Connect EKI-7556MI to the Ethernet then your host PC could be configured via Ethernet. Or you can
directly connect EKI-7556MI to your host PC with a straight-through or cross over Ethernet cable.
Before to use web management, install the industrial switch on the network and make sure that any one
of PCs on the network can connect with the industrial switch through the web browser. The industrial
switch default value of IP, subnet mask, username and password are as below:
• IP Address: 192.168.1.1
• Subnet Mask: 255.255.255.0
• Default Gateway: 192.168.1.254
• User Name: admin
• Password: admin
Open Internet Explorer and type EKI-7559MI/SI's IP in the Address field and then press Enter to bring up
the web login dialog box.
The default user name and password are both admin. Fill in the user name and password and then
press OK to enter the configuration. You can change the password in the User Authentication section.
EKI-7556MI_Manual
Your host PC should be in the same VLAN setting with EKI-7556MI, or the
management will not be configured.
Figure 3.3-1
Figure 3.3-2
Type the address in the URL
Web Login Window
46

Advertisement

Table of Contents
loading

Table of Contents