Din-Rail Mounting; Figure 2.3-2 Installation To Din-Rail Step 1 - Advantech EKI-7556MI User Manual

2.3.2

DIN-rail Mounting

You can also mount EKI-7556MI on a standard DIN-rail by steps below.
The DIN-rail kit is screwed on the industrial switch when out of factory. If the DIN-rail kit is not screwed
on the industrial switch, please screw the DIN-rail kit on the switch first.
First, hang the EKI-7556MI to the DIN-rail with angle of inclination. See the figure below.
Figure 2.3-2 Installation to DIN-rail Step 1
23 Chapter2